Skip to content
Appointment timing depends on ZIP code, route capacity, and access.
Kenmore appliance service
Error Code

Kenmore Wall Oven F3/E2 Error Code

Plain-language guidance for Kenmore code F3/E2 on Wall Oven — symptoms, safe checks, and when to call a technician.

  • Upfront Estimates
  • Approval Before Repair
  • Expert Technicians
  • Workmanship Warranty

At a glance

Error code overview

A plain-language snapshot of F3/E2 for Kenmore Wall Oven — confirm the model series before you act.

Content status Verified

Error code F3/E2
Appliance Wall Oven
Quick answer

Kenmore 665 wall oven code F3/E2: oven temperature above 575 degrees F in BAKE mode, with the manual steps.

Model compatibility

Kenmore reuses codes across series and model years, so F3/E2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Oven temperature is more than 575 F in Bake mode.

F3/E2 appears on Kenmore 665 model wall ovens when the oven temperature goes beyond 575 degrees F in BAKE mode.

Manual steps, in order

  1. Disconnect power or unplug the wall oven.
  2. Reconnect the oven temperature sensor wire if it is loose.
  3. Replace the wire harness if damaged.

Left to a technician

Resistance measured on the sensor with a volt/ohm meter, compared with 1080 ohms at room temperature (70 degrees F), decides whether the sensor is replaced. A sensor and harness that test fine lead to a new electronic oven control (EOC).

Compare with

F3/E3 is the same kind of reading in Clean mode, and F3/E1 is a shorted sensor circuit.

Los Angeles Kenmore oven service

If a Kenmore wall oven in Los Angeles reports F3/E2, call (310) 554-8899 about oven repair. The code, the model number and the steps already taken are what to have on hand.

Source: Kenmore 665 model wall oven error codes

Caution

Safety warning

Important safety warning

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Get started

Seeing this code on your Kenmore appliance?

Book a specialist Kenmore service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Service areas

Available in these areas

Get started

Ready to restore your Kenmore appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us about your Kenmore we’ll take it from there

Share your model, symptom, and ZIP in Los Angeles County or Orange County and we’ll confirm an appointment. Prefer to talk? Call us during business hours.

(310) 554-8899
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Kenmore appliance repair across Los Angeles County and Orange County.
Response time Appointment timing depends on ZIP code, route capacity, and access.