Kenmore Dishwasher C1 Error Code

C1 shows on Kenmore 363 electronic control dishwashers when draining takes longer than 2 minutes. The manual answers it with a simple checklist that runs from the sink to the pump.

Checklist from the manual

Start at the kitchen sink and clear any clog from its drain. Then unplug the dishwasher and clear clogs from the drain hose that leads away from it. A hose that is damaged gets replaced rather than patched up. The last stop is the drain pump: look it over for a clog or damage, and replace it if it is damaged.

Where C1 sits among the C codes

The manual gives the same checklist for the longer drain-time code and for the no-drain code.

• C2 means the drain time went past 7 minutes.
• C3 means the dishwasher will not drain at all.
• C5 is the opposite problem: drain time too short, with the dishwasher underfilled.

Dishwasher service in Los Angeles for Kenmore owners

If the sink, hose and pump checks do not clear C1, reach the Los Angeles team on (310) 554-8899 or read about Kenmore dishwasher repair. Say which code you saw and what you already cleared, and give the full model number.

Source: Kenmore 363 electronic control model dishwasher error codes