Skip to content
Appointment timing depends on ZIP code, route capacity, and access.
Call (310) 554-8899
Kenmore appliance service
Error Code

Kenmore Dishwasher C5 Error Code

Plain-language guidance for Kenmore code C5 on Dishwasher — symptoms, safe checks, and when to call a technician.

Book a Repair (310) 554-8899
  • Upfront Estimates
  • Approval Before Repair
  • Expert Technicians
  • Workmanship Warranty

At a glance

Error code overview

A plain-language snapshot of C5 for Kenmore Dishwasher — confirm the model series before you act.

Lena Hart Written by Lena Hart Appliance Repair Content Specialist Published October 20, 2026

Content status Verified

Error code C5
Appliance Dishwasher
Quick answer

C5 on a Kenmore 363 electronic control dishwasher signals an underfilled tub. The manual covers the water supply, overfill float and inlet valve.

Model compatibility

Kenmore reuses codes across series and model years, so C5 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

The drain time was too short because the dishwasher is underfilled.

C5 appears on Kenmore 363 electronic control dishwashers when the drain time is too short, which the manual ties to the dishwasher being underfilled. The tub is not getting enough water.

Checks that come first

Make sure the water supply to the dishwasher is fully open. Then look at the overfill float switch: if it is stuck in the up position, the dishwasher cannot fill properly.

The inlet valve

Unplug the dishwasher and shut off the water supply, then disconnect the fill line and look at the inlet water valve.

  • A clogged inlet screen means replacing the whole valve. Cleaning only the screen is not enough, because debris could get into the valve body, leave the valve stuck open and cause flooding.
  • Check the wiring connections on the valve and tighten any that are loose.
  • A valve that will not open when it is activated gets replaced.

Related codes

  • C4 shows when the dishwasher has overfilled.
  • C6 shows when the water temperature is too low.

Kenmore dishwasher service in Los Angeles

Los Angeles owners who still see C5 after these checks can call (310) 554-8899. The dishwasher repair team will want the model number and the details of what you tightened, cleaned or replaced.

Source: Kenmore 363 electronic control model dishwasher error codes

Caution

Safety warning

Important safety warning

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Get started

Seeing this code on your Kenmore appliance?

Book a specialist Kenmore service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Book a Repair (310) 554-8899
Fix it right

Recommended repair service

AE C1 C2 C3 C4 C6
Service areas

Available in these areas

Get started

Ready to restore your Kenmore appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (310) 554-8899

Book a repair

Tell us about your Kenmore we’ll take it from there

Share your model, symptom, and ZIP in Los Angeles County or Orange County and we’ll confirm an appointment. Prefer to talk? Call us during business hours.

(310) 554-8899
Phone (310) 554-8899
Email info@kenmorelosangeles.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Kenmore appliance repair across Los Angeles County and Orange County.
Response time Appointment timing depends on ZIP code, route capacity, and access.