A plain-language snapshot of F1 for Kenmore Range — confirm the model series before you act.
Written by
Lena Hart Appliance Repair Content SpecialistPublished October 20, 2026
Content statusVerified
Error codeF1
ApplianceRange
Quick answer
F1 on a Kenmore range points to the oven temperature sensor or the electronic oven control, depending on the series.
Model compatibility
Kenmore reuses codes across series and model years, so F1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What thiscode means
F1 is a defective oven temperature sensor or a defective electronic oven control, depending on the Kenmore range series.
An F1 on a Kenmore range display points to the oven’s temperature sensing or its main control, and the exact meaning depends on which series you own.
What F1 means by series
Elite 721-prefix electric range and Elite double-oven gas range (721 models): defective upper oven temperature sensor.
362 model freestanding range: defective electronic control board.
790-prefix self-cleaning and manual-cleaning freestanding ranges: oven temperature sensor failure, or a failed electronic oven control board.
665 model range: defective electronic oven control. These models show codes as F-code/E-code pairs.
What the owner’s manual says to do
Unplug the range before touching anything. On the 790-prefix ranges, leave it unplugged for 30 seconds and plug it back in. On the 362 model, unplug it for 3 minutes so the control board resets, then restore power.
If F1 returns, the remaining steps are technician work. On the Elite 721 ranges the upper oven temperature sensor is measured for resistance and replaced if it is off. On the 362 model the manual calls for a new electronic control board. On the 790 ranges a technician checks the sensor circuit from the control board, then the sensor itself, then the wire harness, and the control board last.
Related Kenmore range codes
F18 is the matching lower oven temperature sensor fault.
If F1 comes back after the reset, call (310) 554-8899 about Kenmore range repair in Los Angeles. Have the code, your model number and what you already tried ready when you call.
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Get started
Seeing this code onyour Kenmore appliance?
Book a specialist Kenmore service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.
Tell us about your Kenmorewe’ll take it from there
Share your model, symptom, and ZIP in Los Angeles County or Orange County and we’ll confirm an appointment. Prefer to talk? Call us during business hours.
