A plain-language snapshot of F6E1 (6-1) for Kenmore Dishwasher — confirm the model series before you act.
Written by
Lena Hart Appliance Repair Content SpecialistPublished October 20, 2026
Content statusVerified
Error codeF6E1 (6-1)
ApplianceDishwasher
Quick answer
F6E1 on a Kenmore dishwasher means no water is entering the tub; the manual starts with the overfill float.
Model compatibility
Kenmore reuses codes across series and model years, so F6E1 (6-1) may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What thiscode means
Dishwasher will not fill: the control does not detect water entering the tub.
F6E1 is the Inlet Water code: the electronic control does not detect water entering the dishwasher tub. On models without a digital display, the Clean light flashes 6 times, then once. The Function code flashes first, the light pauses, and then the Problem code flashes, and the console is disabled while the code flashes. It is listed for Kenmore HE and Elite HE, Global HE and MicroClean HE dishwashers.
Start with the float
Look for an item stuck under the overfill float and remove it. If the float sticks in the up position, the dishwasher will not fill.
Water supply checks
Unplug the dishwasher, shut the water supply valve, and disconnect the supply line from the water inlet valve. Check the valve screen for clogs. A clogged screen means replacing the valve, because debris can get into the valve body and make it stick open, which risks flooding the kitchen. With a clear screen, the supply line end goes in a shallow pan and the supply valve is opened briefly. No flow means a plumber should repair the water supply. If water flows, the inlet valve wiring is checked; loose wires are reconnected and a damaged harness replaced. Otherwise the water inlet valve or electronic control board may need replacing.
Related fill codes
F6E2 reports the inlet valve itself, F6E4 an open float switch, and F6E6 water that is too cold.
Kenmore dishwasher repair in Los Angeles
Los Angeles owners can phone (310) 554-8899 to book dishwasher repair for a Kenmore showing F6E1. It helps to read out the model number and describe the steps you have already taken.
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Get started
Seeing this code onyour Kenmore appliance?
Book a specialist Kenmore service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.
Tell us about your Kenmorewe’ll take it from there
Share your model, symptom, and ZIP in Los Angeles County or Orange County and we’ll confirm an appointment. Prefer to talk? Call us during business hours.
