Skip to content
Appointment timing depends on ZIP code, route capacity, and access.
Kenmore appliance service
Error Code

Kenmore Range F4/E1 Error Code

Plain-language guidance for Kenmore code F4/E1 on Range — symptoms, safe checks, and when to call a technician.

  • Upfront Estimates
  • Approval Before Repair
  • Expert Technicians
  • Workmanship Warranty

At a glance

Error code overview

A plain-language snapshot of F4/E1 for Kenmore Range — confirm the model series before you act.

Content status Verified

Error code F4/E1
Appliance Range
Quick answer

F4/E1 on a Kenmore 665 range points to a shorted meat probe. What the chart checks, in order.

Model compatibility

Kenmore reuses codes across series and model years, so F4/E1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

F4/E1 means the meat probe is shorted.

If your Kenmore 665-series range flashes F4/E1, the meat probe is reporting a short. This family shows its codes as an F-code and an E-code pair.

What gets checked, in order

First, disconnect power or unplug the range. Then the meat probe is unplugged and its resistance is measured with a volt/ohm meter; it should read 59,000 ohms at 70F, and a probe that does not is replaced. If the probe tests fine, push it firmly into the oven jack and make sure the connection is tight. A damaged or worn jack is replaced. Last, the wire harness at the probe jack is reconnected if loose, and replaced if it is damaged.

The resistance reading is technician work. What an owner can do is unplug the range, remove the probe, and see whether it seats firmly in the jack.

Codes to compare

  • F4: a defective lower oven temperature sensor.
  • F31: a shorted oven temperature sensor circuit.
  • F5/E0: door switch and latch switch disagree.

Kenmore range repair in Los Angeles

Los Angeles owners can call (310) 554-8899 for Kenmore range repair. Mention the F4/E1 code, your model number and whether you already reseated the probe.

Source: Kenmore 665 model range error codes (F/E format)

Caution

Safety warning

Important safety warning

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Get started

Seeing this code on your Kenmore appliance?

Book a specialist Kenmore service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Service areas

Available in these areas

Get started

Ready to restore your Kenmore appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us about your Kenmore we’ll take it from there

Share your model, symptom, and ZIP in Los Angeles County or Orange County and we’ll confirm an appointment. Prefer to talk? Call us during business hours.

(310) 554-8899
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Kenmore appliance repair across Los Angeles County and Orange County.
Response time Appointment timing depends on ZIP code, route capacity, and access.